Skip to research
Vraelis Research
All researchVraelis Imprint / Reference note and proposed protocol

Integration-step sensitivity

Check whether a conclusion changes when the numerical step changes.

Research note · November 14, 2026

Research question

Is a simulated failure a property of the modeled system or of the integration settings?

Method

  1. Choose a bounded scenario with fixed initial state and inputs. Run it at a declared sequence of decreasing integration steps while keeping the physical model unchanged.
  2. Compare quantities relevant to the question, such as peak displacement, contact force or settling time. Define acceptable differences before inspecting the final sweep.
  3. Retain unstable and failed runs. Inspect whether the apparent result converges as the step changes, and record computational cost alongside the physical outputs.

Records to retain

  • Integrator and step settings
  • Initial state and forcing
  • Per-run output traces
  • Failure and cost observations

Source basis

MuJoCo documents numerical integration choices and their interaction with model dynamics. Step-size sensitivity is therefore a necessary question when a result depends on fast contacts, stiff behavior or rapid control changes.

Interpretation & limits

A stable numerical result can still come from an inaccurate physical model. This proposed sensitivity study is not a general validation of a simulator or of Imprint.

Next experiments

  • Run a step-size sweep on a simple mechanism.
  • Separate numerical divergence from a modeled operating-limit violation.

References

  1. MuJoCo computation
  2. MuJoCo simulation

Technical reference

Implementation details supporting this note, drawn directly from the maintained documentation. These are technical references, not additional papers or new experimental results. Expand a topic to inspect its method, fields and limits.

Related notes